Engineering Construction
《工程建设》由新加坡Viser Technology Ptd Ltd主办，国际标准刊号：ISSN：2630-5283。本刊长期以来注重质量，编排规范，选稿较严格，学术水平较高，深受高校教师及科研院所研究人员青睐，Viser Technology Ptd Ltd官网、中国知网及维普网全文收录。
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.
Creative Commons Attribution-NonCommercial-NoDerivs (CC BY-NC-ND):
Allows users to copy and distribute the Article, provided this is not done for commercial purposes and further does not permit distribution of the Article if it is changed or edited in any way, and provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, and that the licensor is not represented as endorsing the use made of the work. The full details of the license are available at https://creativecommons.org/licenses/by-nc-nd/4.0/.
Copyediting and Proofs
Manuscripts must be written either in good American or British English, in a clear language, correct punctuations, and consistent style throughout the manuscript. Authors are advised to send for professional English language editing service before submission. (Viser Manuscript Submission Template)
Editorial Policies
Peer Review
Viser Technology Pte. Ltd. follows a double-blind peer-review procedure for submissions of all manuscripts to its journals.
All submitted manuscripts are subjected to a fair, unbiased, and extensive peer review in consultation with the assigned journal's Editorial Board Member and independent internal or external referees (usually two reviewers), which have expertise in the field of the submitted manuscripts. The peer-review applies a short and rapid, but fair and professional assessment on all submitted manuscripts. The journal's Editor-in-Chief is then decided on the submitted manuscripts based on all the peer reviewers' comments before conveying to the author(s).
All submissions from the Editor-in-Chief will undergo independent peer-review and assess by the journal's Editorial Board Member or in-house Editor for the decision on acceptance.
Ethical Approval of Studies and Informed Consent
For human or animal experimental investigations, it is a prerequisite to provide a formal review and approval, or review and waiver, by an appropriate institutional review board or ethics committee, which should be documented in the paper. For investigations undertaken on human subjects, the manner in which the informed consent was obtained from the study participants (i.e., oral or written) should be stated clearly in the Materials and Methods section.
The authors must obtain patient consent either orally or written when they use confidential case material. However, patient consent is not required for very brief case vignettes that do not contain identifying information or if the case material is masked sufficiently to prevent the identification of the patient.
The authors should inform and discuss with the recruiting patients on the purpose(s) of publication, the possible risks and benefits to obtain, and the patient's right to withhold or withdraw consent. In the case of a minor patient, consent should be obtained from the parent(s) or guardian(s). The authors should not perform any misconduct or deceive the recruiting patients in obtaining their consent.
Standard Protocol on Approvals, Registrations, Patients Consents & Animal Protection
Human: All clinical investigations must be conducted according to the Declaration of Helsinki principles, as revised in 2000 and 2008. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (www.icmje.org) in conjunction with the patient's consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request the authors to provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study if necessary.
Animals: All original research manuscripts involving the use of animals, the authors should indicate whether relevant international, national, and/or institutional guidelines for the care and use of laboratory animals were conducted accordingly. The authors must include details of animal welfare (such as species, number, gender, age, weight, housing conditions, welfare, training and the fate of the animals at the end of the experiment) and relevant details of steps taken to ameliorate suffering in all works in the Materials and Method section of a manuscript. Similarly, any experiments involving animals from clients or private institutions, the authors are required to get informed client consent and adhere to a high standard (best practice) of veterinary care. These details should be included in the Materials and Methods section of the manuscript.
Publishing Ethics
Publishing Policies
Viser Technology Pte. Ltd. requests all members involved in the journal publishing process to adhere to the "Code of Conduct for Journal Editors" and "Code of Conduct for Journal Publishers" as stipulated by COPE (Committee on Publication Ethics).
The publisher strictly adheres to the guidelines and best practices, which include Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from the International Committee of Medical JournalsEditors (ICMJE) and the Principles of Transparency and Best Practice in Scholarly Publishing developed by Committee on Publication Ethics (COPE), Directory of Open Access Journals (DOAJ), Open Access Scholarly Publishers Association (OASPA) and World Association of Medical Editors (WAME).
期刊针对工程项目建设的全过程，重点报道工程建设过程的科研成果、先进技术、高效设备、新型材料、工程项目管理经验等，突出工程领域新技术、新工艺、新方法，反映建筑、水电、石化等工程领域新成果、新进展，促进工程技术行业的交流与成果展示，为推动国际工程技术和科学技术发展服务。
鼓励工程建设各领域的专业技术人员和管理干部以及大专院校相关专业的师生和科研人员来稿，有关国家科技计划、自然科学基金和各种部门、地方、院所科技基金资助项目的文章优先发布。
ISSN: 2630-5283 (online)
ISSN: 2717-5375 (print)
The publication frequency of this journal is Monthly
| 马磊 | 神华宁煤集团煤制油空分厂 | 中国 |
| 成岳 | 景德镇陶瓷大学 | 中国 |
| 杨高尚 | 中南大学 | 中国 |
| 吕尚辉 | 首创置业股份有限公司 | 中国 |
| 肖泳 | 中煤科工集团重庆设计研究院有限公司 | 中国 |
| 游天龙 | 山西吉利汽车部件有限公司 | 中国 |
| 赵玉凤 | 河南城建学院 | 中国 |
| 黄孟军 | 重庆文理学院 | 中国 |
| 贺海军 | 大庆油田有限责任公司 | 中国 |
| 徐鹏 | 河海大学 | 中国 |
Email: eng_constr@outlook.com
Submit and Check
Registration and login are required to submit items online and to check the status of current submissions. To register, click the register button below. If you already have an account, proceed to login through the following with your username and password.
Latest Issue
Archives
Search
Volume 3, Issue 8, 2020
新型绿色建筑工程造价预算及成本控制的分析
黄丽红
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2361
人防工程质量监督管理常见问题及对策
牛军利
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2362
公路桥梁钻孔灌注桩施工工艺及其质量控制
陈偲偲, 刘磊, 徐杰, 樊欢
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2363
探析城市被动式超低能耗建筑技术应用
朱琳, 王富谦, 李波
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2364
超低能耗被动式建筑可再生能源应用分析
郭欢欢, 王富谦, 李波
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2365
探析建筑机电安装和土建交叉施工的协调管理
杜雷
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2366
试谈超短工期下电子洁净厂房土建施工组织关键技术
杜雷
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2367
高烈度地区超限高层建筑抗震设计实例简析
潘哲
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2368
公路桥梁养护与维修加固施工技术的探讨
覃旭太
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2369
圆盘造球机刮刀系统的改进措施
陈志远, 周晓雷, 赵志豪, 胡耀先
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2370
建筑工程结构裂缝控制及处理技术
焦鹏
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2371
土木工程结构设计存在的问题及设计措施
宋亚辉
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2372
浅析军用梁在顶管操作平台中的应用
雷超雯, 何加阳, 鲍仁行, 白建超, 边东强
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2373
建筑工程施工技术管理水平有效提升策略
何庆阳
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2374
浅埋暗挖技术在燃气管线施工中的应用
陈霜
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2375
浅析天然气管道工程施工建设质量管理研究
罗鹏飞
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2376
浅谈建筑工程管理现状及改进对策
施建秋
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2377
建筑装饰装修工程施工要点研究
李二帅, 陶志文
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2378
GPS高程拟合代替四等水准测量精度探析
唐晓伟
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2379
试谈电气节能技术在城建工程施工中的应用
张晓龙, 杨光, 郭晓艳, 李梅海
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2380
探析城建建筑节能施工技术
尹超南, 温亚楠, 冯伟纳, 杨光
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2381
试谈城建工程施工中注浆技术及运用
严雨飞, 张治雷, 魏亚君, 赵焰焰
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2382
试分析城建工程给排水施工技术要点
马二刚, 安宁, 张晓龙, 朱行空
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2383
试谈城建深基坑工程中的支护施工技术
罗慧, 王晨光, 蒋萌萌, 刘伟莉
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2384
预应力技术在城建高层建筑结构施工的应用研究
刘婷婷, 刘艳秋, 司沥通, 司会东
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2385
城建施工技术管理控制研究
刘佳喆, 周莹莹, 张兰兰, 李昂
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2386
解析城建工程大体积混凝土施工技术
陈方成, 陈亚冲, 李梅海, 李春阳
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2387
滨海地区软弱地层大直径超长桩垂直度控制
刘玥岩, 程绰, 黄文明, 匡丕榜, 李玲珑
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2388
外砂河特大桥水中承台施工关键技术
匡丕榜, 黄文明, 刘玥岩, 廖良雄, 戚培海
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2389
滨海地区软弱地质条件下水中深基坑钢板桩围堰止水研究
戚培海, 匡丕榜, 张勇刚, 刘玥岩, 凌峰
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2390
煤化工项目建设人员安全教育现状分析和思路探讨
蒋海夫, 娄兴敏
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2391
如何提高建筑工程管理及施工质量控制
郑宇
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2393
危险废物焚烧处置及烟气净化工艺分析
姜骋宇
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2394
城市规划管理中的地理信息系统运用研究
赵玉清
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2396
试论建筑工程造价合同管理及风险控制
石辉
Engineering Construction
|
Volume 3 Issue 8, 2020
|
PDF
DOI: 10.33142/ec.v3i8.2397
This journal charges an article processing charge of S$ 300.00 (Singapore Dollars)
Viser Technology provides the following payment channels. Upon reception of the invoice from Viser, you may choose one of the following payment methods that suit you the most.
Bank Transfer / Wire Transfer
- Bank: DBS Bank Ltd
- Account Name: Viser Technology Pte Ltd
- Account No.: 023-906417-5
- Swift Code: DBSSSGSG
Alipay / Wechat Pay
Scan the following QR code for payment
UnionPay
Viser supports payments via UnionPay. If you wish to make the payment using a UnionPay enabled credit/debit card, please contact us at viser-tech@outlook.com to request for the payment link to be sent to your email address. Once you have received the payment request email, click on the link to go to the secure UnionPay payment page to complete the payment.
In your payment request email, please indicate the following information:
- Author Name(s)
- Article Number
- Article Title
- Journal Title
Should you encounter any problem related to payment, please contact viser-tech@outlook.com for assistance.
