Engineering Construction
《工程建设》由新加坡Viser Technology Ptd Ltd主办，国际标准刊号：ISSN：2630-5283。本刊长期以来注重质量，编排规范，选稿较严格，学术水平较高，深受高校教师及科研院所研究人员青睐，Viser Technology Ptd Ltd官网、中国知网及维普网全文收录。
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.
Creative Commons Attribution-NonCommercial-NoDerivs (CC BY-NC-ND):
Allows users to copy and distribute the Article, provided this is not done for commercial purposes and further does not permit distribution of the Article if it is changed or edited in any way, and provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, and that the licensor is not represented as endorsing the use made of the work. The full details of the license are available at https://creativecommons.org/licenses/by-nc-nd/4.0/.
Copyediting and Proofs
Manuscripts must be written either in good American or British English, in a clear language, correct punctuations, and consistent style throughout the manuscript. Authors are advised to send for professional English language editing service before submission. (Viser Manuscript Submission Template)
Editorial Policies
Peer Review
Viser Technology Pte. Ltd. follows a double-blind peer-review procedure for submissions of all manuscripts to its journals.
All submitted manuscripts are subjected to a fair, unbiased, and extensive peer review in consultation with the assigned journal's Editorial Board Member and independent internal or external referees (usually two reviewers), which have expertise in the field of the submitted manuscripts. The peer-review applies a short and rapid, but fair and professional assessment on all submitted manuscripts. The journal's Editor-in-Chief is then decided on the submitted manuscripts based on all the peer reviewers' comments before conveying to the author(s).
All submissions from the Editor-in-Chief will undergo independent peer-review and assess by the journal's Editorial Board Member or in-house Editor for the decision on acceptance.
Ethical Approval of Studies and Informed Consent
For human or animal experimental investigations, it is a prerequisite to provide a formal review and approval, or review and waiver, by an appropriate institutional review board or ethics committee, which should be documented in the paper. For investigations undertaken on human subjects, the manner in which the informed consent was obtained from the study participants (i.e., oral or written) should be stated clearly in the Materials and Methods section.
The authors must obtain patient consent either orally or written when they use confidential case material. However, patient consent is not required for very brief case vignettes that do not contain identifying information or if the case material is masked sufficiently to prevent the identification of the patient.
The authors should inform and discuss with the recruiting patients on the purpose(s) of publication, the possible risks and benefits to obtain, and the patient's right to withhold or withdraw consent. In the case of a minor patient, consent should be obtained from the parent(s) or guardian(s). The authors should not perform any misconduct or deceive the recruiting patients in obtaining their consent.
Standard Protocol on Approvals, Registrations, Patients Consents & Animal Protection
Human: All clinical investigations must be conducted according to the Declaration of Helsinki principles, as revised in 2000 and 2008. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (www.icmje.org) in conjunction with the patient's consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request the authors to provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study if necessary.
Animals: All original research manuscripts involving the use of animals, the authors should indicate whether relevant international, national, and/or institutional guidelines for the care and use of laboratory animals were conducted accordingly. The authors must include details of animal welfare (such as species, number, gender, age, weight, housing conditions, welfare, training and the fate of the animals at the end of the experiment) and relevant details of steps taken to ameliorate suffering in all works in the Materials and Method section of a manuscript. Similarly, any experiments involving animals from clients or private institutions, the authors are required to get informed client consent and adhere to a high standard (best practice) of veterinary care. These details should be included in the Materials and Methods section of the manuscript.
Publishing Ethics
Publishing Policies
Viser Technology Pte. Ltd. requests all members involved in the journal publishing process to adhere to the "Code of Conduct for Journal Editors" and "Code of Conduct for Journal Publishers" as stipulated by COPE (Committee on Publication Ethics).
The publisher strictly adheres to the guidelines and best practices, which include Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from the International Committee of Medical JournalsEditors (ICMJE) and the Principles of Transparency and Best Practice in Scholarly Publishing developed by Committee on Publication Ethics (COPE), Directory of Open Access Journals (DOAJ), Open Access Scholarly Publishers Association (OASPA) and World Association of Medical Editors (WAME).
期刊针对工程项目建设的全过程，重点报道工程建设过程的科研成果、先进技术、高效设备、新型材料、工程项目管理经验等，突出工程领域新技术、新工艺、新方法，反映建筑、水电、石化等工程领域新成果、新进展，促进工程技术行业的交流与成果展示，为推动国际工程技术和科学技术发展服务。
鼓励工程建设各领域的专业技术人员和管理干部以及大专院校相关专业的师生和科研人员来稿，有关国家科技计划、自然科学基金和各种部门、地方、院所科技基金资助项目的文章优先发布。
ISSN: 2630-5283 (online)
ISSN: 2717-5375 (print)
The publication frequency of this journal is Monthly
| 马磊 | 神华宁煤集团煤制油空分厂 | 中国 |
| 成岳 | 景德镇陶瓷大学 | 中国 |
| 杨高尚 | 中南大学 | 中国 |
| 吕尚辉 | 首创置业股份有限公司 | 中国 |
| 肖泳 | 中煤科工集团重庆设计研究院有限公司 | 中国 |
| 游天龙 | 山西吉利汽车部件有限公司 | 中国 |
| 赵玉凤 | 河南城建学院 | 中国 |
| 黄孟军 | 重庆文理学院 | 中国 |
| 贺海军 | 大庆油田有限责任公司 | 中国 |
| 徐鹏 | 河海大学 | 中国 |
Email: eng_constr@outlook.com
Submit and Check
Registration and login are required to submit items online and to check the status of current submissions. To register, click the register button below. If you already have an account, proceed to login through the following with your username and password.
Latest Issue
Archives
Search
Volume 3, Issue 5, 2020
论建筑工程项目管理中的施工现场管理与优化措施
曾静
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1885
煤层气钻井工程风险及监控分析
颜利冲
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1886
燃气轮机旁路弯管焊接工艺分析
张雪飞
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1887
浅谈如何加强建筑工程施工管理
卢云宝
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1888
PMC 诊断技术在数控机床维修中的应用分析
刘刚, 谭伟, 梁羽
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1889
活性石灰回转窑耐材的损坏原因及控制分析
罗立章
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1890
土木建筑工程中的大体积混凝土结构施工技术分析
景泽庆川
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1891
工程项目施工阶段的质量安全控制探究
汪炳辉, 孙军伟, 潘旭峰
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1892
巴罗二号隧道现场工程地质表现及分析
吴世友, 徐忠山, 李维高
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1893
建筑幕墙结构设计及优化措施探讨
张媛媛
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1894
新时期城市市政园林工程施工管理研究
丁银雪
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1895
探析土木工程建筑结构设计中的问题
白烨东
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1896
建筑工程管理现状分析及改进对策研究
刘兵
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1897
倾斜摄影测量技术在不动产测绘中的应用策略研究
海富成
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1898
低碳理念在城市园林植物景观设计中的应用研究
顾大成
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1899
城市地下综合管廊防水的设计与施工方法
王剑平
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1900
建设项目工程造价全过程管理的控制点分析
左云
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1901
浅谈建设单位对工程造价的全过程控制
刘铭
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1902
高层建筑给排水施工及管道安装技术研究
闫小光
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1903
论土建项目工程建设施工中的技术管理
朱新江
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1904
环保型水性建筑保温隔热涂料研究
王军刚
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1905
压力管道工程焊接技术与质量控制的探讨
王洪丹, 洪瑶
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1906
建筑工程现场施工中的安全与施工技术探究
张涛
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1907
道路桥梁施工技术与管理研究
常乃坤
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1908
可编程控制器在污水处理过程中的应用
刘亮亮, 查乐华
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1909
钢结构工程质量控制方法及工程应用
杨元东, 刘志诚
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1910
浅析建筑工程施工质量安全控制与项目管理
罗公伟
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1911
建筑工程施工技术管理现状与创新方法
王永树
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1912
BIM技术在装配式建筑施工管理中的应用
孙少武
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1913
有色金属真空冶金技术的开发与应用研究
常波波
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1914
建筑工程造价预结算与建筑施工成本管理的关系浅析
鲁自海
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1915
关于建筑工程造价控制与管理分析探讨
王启金
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1916
洁净室净化空调系统的节能措施
林张华
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1917
自动化技术在机械设计与制造的应用
王晓楠
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1918
通风技术在瓦斯治理中的应用探索
孙晓超
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1919
煤化工项目高空作业防护实例探讨和研究
蒋海夫
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1920
化工企业财务管理现状及对策
任建樟
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1921
测绘新技术在矿山测量中的应用分析
刘双群
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1922
倾斜摄影测量技术在不动产测绘中的应用策略
李勇
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1923
建筑工程施工管理中精细化管理的运用
王国辉
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1924
激光雷达测绘技术在工程测量中的应用分析
陈欣慰
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1925
关于钢筋混凝土筒仓顶板支撑体系的讨论
王志勇
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1926
建筑工程项目中岩土工程勘察重要技术分析
张耀国
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1927
浅析城市轨道交通工程施工成本管控
季明远
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1928
建筑工程造价超预算的原因与控制措施
何明
Engineering Construction
|
Volume 3 Issue 5, 2020
|
PDF
DOI: 10.33142/ec.v3i5.1929
This journal charges an article processing charge of S$ 300.00 (Singapore Dollars)
Viser Technology provides the following payment channels. Upon reception of the invoice from Viser, you may choose one of the following payment methods that suit you the most.
Bank Transfer / Wire Transfer
- Bank: DBS Bank Ltd
- Account Name: Viser Technology Pte Ltd
- Account No.: 023-906417-5
- Swift Code: DBSSSGSG
Alipay / Wechat Pay
Scan the following QR code for payment
UnionPay
Viser supports payments via UnionPay. If you wish to make the payment using a UnionPay enabled credit/debit card, please contact us at viser-tech@outlook.com to request for the payment link to be sent to your email address. Once you have received the payment request email, click on the link to go to the secure UnionPay payment page to complete the payment.
In your payment request email, please indicate the following information:
- Author Name(s)
- Article Number
- Article Title
- Journal Title
Should you encounter any problem related to payment, please contact viser-tech@outlook.com for assistance.
