Engineering Construction

Introduction

《工程建设》由新加坡Viser Technology Ptd Ltd主办，国际标准刊号：ISSN：2630-5283。本刊长期以来注重质量，编排规范，选稿较严格，学术水平较高，深受高校教师及科研院所研究人员青睐，Viser Technology Ptd Ltd官网、中国知网及维普网全文收录。

Open Access Policy

This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.

Creative Commons Attribution-NonCommercial-NoDerivs (CC BY-NC-ND):

Allows users to copy and distribute the Article, provided this is not done for commercial purposes and further does not permit distribution of the Article if it is changed or edited in any way, and provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, and that the licensor is not represented as endorsing the use made of the work. The full details of the license are available at https://creativecommons.org/licenses/by-nc-nd/4.0/.

Copyediting and Proofs

Manuscripts must be written either in good American or British English, in a clear language, correct punctuations, and consistent style throughout the manuscript. Authors are advised to send for professional English language editing service before submission. (Viser Manuscript Submission Template)

Editorial Policies

Peer Review

Viser Technology Pte. Ltd. follows a double-blind peer-review procedure for submissions of all manuscripts to its journals.

All submitted manuscripts are subjected to a fair, unbiased, and extensive peer review in consultation with the assigned journal's Editorial Board Member and independent internal or external referees (usually two reviewers), which have expertise in the field of the submitted manuscripts. The peer-review applies a short and rapid, but fair and professional assessment on all submitted manuscripts. The journal's Editor-in-Chief is then decided on the submitted manuscripts based on all the peer reviewers' comments before conveying to the author(s).

All submissions from the Editor-in-Chief will undergo independent peer-review and assess by the journal's Editorial Board Member or in-house Editor for the decision on acceptance.

Ethical Approval of Studies and Informed Consent

For human or animal experimental investigations, it is a prerequisite to provide a formal review and approval, or review and waiver, by an appropriate institutional review board or ethics committee, which should be documented in the paper. For investigations undertaken on human subjects, the manner in which the informed consent was obtained from the study participants (i.e., oral or written) should be stated clearly in the Materials and Methods section.

The authors must obtain patient consent either orally or written when they use confidential case material. However, patient consent is not required for very brief case vignettes that do not contain identifying information or if the case material is masked sufficiently to prevent the identification of the patient.

The authors should inform and discuss with the recruiting patients on the purpose(s) of publication, the possible risks and benefits to obtain, and the patient's right to withhold or withdraw consent. In the case of a minor patient, consent should be obtained from the parent(s) or guardian(s). The authors should not perform any misconduct or deceive the recruiting patients in obtaining their consent.

Standard Protocol on Approvals, Registrations, Patients Consents & Animal Protection

Human: All clinical investigations must be conducted according to the Declaration of Helsinki principles, as revised in 2000 and 2008. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (www.icmje.org) in conjunction with the patient's consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request the authors to provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study if necessary.

Animals: All original research manuscripts involving the use of animals, the authors should indicate whether relevant international, national, and/or institutional guidelines for the care and use of laboratory animals were conducted accordingly. The authors must include details of animal welfare (such as species, number, gender, age, weight, housing conditions, welfare, training and the fate of the animals at the end of the experiment) and relevant details of steps taken to ameliorate suffering in all works in the Materials and Method section of a manuscript. Similarly, any experiments involving animals from clients or private institutions, the authors are required to get informed client consent and adhere to a high standard (best practice) of veterinary care. These details should be included in the Materials and Methods section of the manuscript.

Publishing Ethics

Publishing Policies

Viser Technology Pte. Ltd. requests all members involved in the journal publishing process to adhere to the "Code of Conduct for Journal Editors" and "Code of Conduct for Journal Publishers" as stipulated by COPE (Committee on Publication Ethics).

The publisher strictly adheres to the guidelines and best practices, which include Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from the International Committee of Medical JournalsEditors (ICMJE) and the Principles of Transparency and Best Practice in Scholarly Publishing developed by Committee on Publication Ethics (COPE), Directory of Open Access Journals (DOAJ), Open Access Scholarly Publishers Association (OASPA) and World Association of Medical Editors (WAME).

Focus and Scope

期刊针对工程项目建设的全过程，重点报道工程建设过程的科研成果、先进技术、高效设备、新型材料、工程项目管理经验等，突出工程领域新技术、新工艺、新方法，反映建筑、水电、石化等工程领域新成果、新进展，促进工程技术行业的交流与成果展示，为推动国际工程技术和科学技术发展服务。

鼓励工程建设各领域的专业技术人员和管理干部以及大专院校相关专业的师生和科研人员来稿，有关国家科技计划、自然科学基金和各种部门、地方、院所科技基金资助项目的文章优先发布。

ISSN

ISSN: 2630-5283 (online)

ISSN: 2717-5375 (print)

Publishing Frequency

The publication frequency of this journal is Monthly

Editor(s)-in-Chief

马磊	神华宁煤集团煤制油空分厂	中国

Editorial Board Members

成岳	景德镇陶瓷大学	中国
杨高尚	中南大学	中国
吕尚辉	首创置业股份有限公司	中国
肖泳	中煤科工集团重庆设计研究院有限公司	中国
游天龙	山西吉利汽车部件有限公司	中国
赵玉凤	河南城建学院	中国
黄孟军	重庆文理学院	中国
贺海军	大庆油田有限责任公司	中国
徐鹏	河海大学	中国

Indexation

Partners

China Science and Technology Journal Database

Contact

Email: eng_constr@outlook.com

Submit and Check

Registration and login are required to submit items online and to check the status of current submissions. To register, click the register button below. If you already have an account, proceed to login through the following with your username and password.

Latest Issue

Volume 3 Issue 11, 2020

Search

Volume 3, Issue 1, 2020

综合降水施工技术在高层建筑深基坑工程中的应用探讨
赵猛, 杨华飞, 周飞
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1288

浅谈建筑工程技术管理与核算成本控制
马志, 冷洁, 张鹏
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1289

建筑工程地基基础检测的重要性和关键技术
杨先平, 张缠顺, 刘芸
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1290

室内装饰在环境艺术设计中的创新探索
刘元平
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1291

基于PDCA循环的投资项目审计风险防控体系构建
油翠英
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1292

土建工程质量管理问题探析
廉苏顺
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1293

浅析建筑工程技术管理及节能减排实施策略
黄文平, 王洋, 李江
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1294

建筑工程干挂石材幕墙的施工技术与质量控制分析
向潘, 杨斌, 冯绍
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1295

道路桥梁施工中应该注意的问题
任景云
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1296

西安绕城高速公路超粘超薄施工质量控制
张海军
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1297

绿色理念在机械设计制造中的渗透分析
龙凤祥
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1298

市政给排水设计中常见的问题及措施
李荣波
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1299

建筑工程中钢结构安装焊接施工技术的应用
姚军
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1300

探析ANSYS在土木工程中的应用
张波
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1301

民航机场场道工程水泥稳定碎石基层冬期施工探析
张振华
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1302

工程风险管理在工程中的应用研究
李卿
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1303

无仓库钢桁架结构双侧相向快速滑移施工技术分析
金栋, 车淼
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1304

仪表接地工程施工要点及案列分析
韩小英
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1305

浅谈农田水利工程建设管理中存在的问题及改善措施
王乐, 姚玮
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1306

水利工程堤防防渗施工技术研究
余中海, 王冰梅
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1307

建筑工程施工现场安全管理探讨
向焕亮
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1308

城镇燃气管道防腐处理方法讨论
张阳
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1309

汽轮机排汽压力高的解决办法
汪武恒
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1310

公路工程施工的常见病害和处理技术
叶海艇
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1311

浅谈公路桥面混凝土铺装施工技术
刘艳武
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1312

跨河系杆拱桥施工及其质量控制措施
李荣乐
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1313

电气自动化在电力工程中的应用
王宇, 孔维权
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1314

建设工程中的安全管理与安全控制
付言廷
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1315

房屋建筑施工现场技术质量管理分析
嵇明明
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1316

数字测绘产品的质量检查与质量的控制
张倩文
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1317

现代建筑工程施工管理的创新
刘莹
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1318

浅析空气分离方法和工艺流程的选择
赵乾浩
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1319

建筑工程主体结构检测在工程实体质量监督中的作用研究
陈光峰
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1320

浅析汽轮机轴承温度高的原因及应对方法
翟广朝
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1321

基于检测的储罐年度检验与安全性评估
刘斌
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1322

动车组间壁、端墙的高防火性能设计与研究
孟凡帅, 姚艳伟, 毛星原, 刘可力
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1323

基于可拓学的地铁运营线路施工检修作业水平研究
章品杨
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1324

明挖地铁车站下穿高架桥桩基托换施工关键技术
章品杨
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1325

格构梁联合锚杆在顺层岩质边坡加固中的数值模拟分析
周敏
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1326

浅谈侧壁悬挑式外脚手架在公建项目中的施工工艺
朱骏
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1327

建筑工程中的深基坑支护施工技术分析
张震
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1328

水文地质在岩土工程勘察中的应用分析
巩云鹏
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1329

浅析我国公路交通工程设施的现状与发展方向
祝令伟
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1330

锅炉优化改造可行性分析
马永驰
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1331

成文信息在信息化平台管理的探索
赵立名, 龚晓波
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1332

浅谈矿井瓦斯防治存在的问题
冯海啸
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1333

长输油气管道安全隐患及防范措施浅谈
梁峰
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1334

化工工艺及化工设备适应性设计研究
熊飞
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1335

基于新时代下园林景观设计的问题及措施探讨
王艳君
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1336

路基路面压实度检测方法及影响因素讨论
谷达明
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1337

公路工程钻孔灌注桩施工中的常见问题及措施分析
王立军
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1338

结合工程实例探讨岩土工程勘察与地基设计中的若干问题
黄法忠
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1339

光伏技术在路面结构中的应用分析
赵冬梅
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1340

换乘站明挖施工对既有车站的影响分析
赵东振
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1342

高效优化公路勘测中的现代测绘技术的应用研究
戴兵
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1343

浅谈乡村规划价值和理念的转型策略
肖泳, 邓罗辰尘, 周小敏
Engineering Construction | Volume 3 Issue 1, 2020 | PDF
DOI: 10.33142/ec.v3i1.1344

Article Processing Charges

This journal charges an article processing charge of S$ 300.00 (Singapore Dollars)

Payment Instructions

Viser Technology provides the following payment channels. Upon reception of the invoice from Viser, you may choose one of the following payment methods that suit you the most.

Bank Transfer / Wire Transfer

Bank: DBS Bank Ltd
Account Name: Viser Technology Pte Ltd
Account No.: 023-906417-5
Swift Code: DBSSSGSG

Alipay / Wechat Pay

Scan the following QR code for payment

UnionPay

Viser supports payments via UnionPay. If you wish to make the payment using a UnionPay enabled credit/debit card, please contact us at viser-tech@outlook.com to request for the payment link to be sent to your email address. Once you have received the payment request email, click on the link to go to the secure UnionPay payment page to complete the payment.

In your payment request email, please indicate the following information:

Author Name(s)
Article Number
Article Title
Journal Title

Should you encounter any problem related to payment, please contact viser-tech@outlook.com for assistance.