
Architecture Engineering and Management
Architecture Engineering and Management was found by Viser Technology Pte. Ltd. in Singapore. The journal pay much attention to quality of paper, strictly select manuscripts and follow normal standard of layout. The journal, a high-level academic , is deeply favoured by postsecondary teacher and scientific researchers. As a journal of open access, the journal dedicated to publish high quality academic papers of construction. Meanwhile the journal provide a platform of communication and information exchange for engineering technicians and professionals. All journal’s papers are indexed by websites such as WANGFANG DATA and Viser Technology Pte. etc.
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge, published as open access. Authors retain copyright but licence exclusive rights in their article to the publisher, authors have the right to:
- Share their article in the same ways permitted to third parties under the relevant user licence (together with personal (scholarly) purposes to create certain derivative works), as long as they give proper attribution and credit to the published work.
- Retain patent, trademark and other intellectual property rights (including raw research data).
- Proper attribution and credit for the published work
Creative Commons Attribution-NonCommercial(CC BY-NC-ND):
Allows users to copy and distribute the Article, provided this is not done for commercial purposes and further does not permit distribution of the Article if it is changed or edited in any way, and provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, and that the licensor is not represented as endorsing the use made of the work. The full details of the license are available at https://creativecommons.org/licenses/by-nc-nd/4.0/.
Editorial Policies
Peer Review
Viser Technology Pte. Ltd. follows a double-blind peer-review procedure for submissions of all manuscripts to its journals.
All submitted manuscripts are subjected to a fair, unbiased, and extensive peer review in consultation with the assigned journal's Editorial Board Member and independent internal or external referees (usually two reviewers), which have expertise in the field of the submitted manuscripts. The peer-review applies a short and rapid, but fair and professional assessment on all submitted manuscripts. The journal's Editor-in-Chief is then decided on the submitted manuscripts based on all the peer reviewers' comments before conveying to the author(s).
All submissions from the Editor-in-Chief will undergo independent peer-review and assess by the journal's Editorial Board Member or in-house Editor for the decision on acceptance.
Ethical Approval of Studies and Informed Consent
For human or animal experimental investigations, it is a prerequisite to provide a formal review and approval, or review and waiver, by an appropriate institutional review board or ethics committee, which should be documented in the paper. For investigations undertaken on human subjects, the manner in which the informed consent was obtained from the study participants (i.e., oral or written) should be stated clearly in the Materials and Methods section.
The authors must obtain patient consent either orally or written when they use confidential case material. However, patient consent is not required for very brief case vignettes that do not contain identifying information or if the case material is masked sufficiently to prevent the identification of the patient.
The authors should inform and discuss with the recruiting patients on the purpose(s) of publication, the possible risks and benefits to obtain, and the patient's right to withhold or withdraw consent. In the case of a minor patient, consent should be obtained from the parent(s) or guardian(s). The authors should not perform any misconduct or deceive the recruiting patients in obtaining their consent.
Standard Protocol on Approvals, Registrations, Patients Consents & Animal Protection
Human: All clinical investigations must be conducted according to the Declaration of Helsinki principles, as revised in 2000 and 2008. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (www.icmje.org) in conjunction with the patient's consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request the authors to provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study if necessary.
Animals: All original research manuscripts involving the use of animals, the authors should indicate whether relevant international, national, and/or institutional guidelines for the care and use of laboratory animals were conducted accordingly. The authors must include details of animal welfare (such as species, number, gender, age, weight, housing conditions, welfare, training and the fate of the animals at the end of the experiment) and relevant details of steps taken to ameliorate suffering in all works in the Materials and Method section of a manuscript. Similarly, any experiments involving animals from clients or private institutions, the authors are required to get informed client consent and adhere to a high standard (best practice) of veterinary care. These details should be included in the Materials and Methods section of the manuscript.
Publishing Ethics
Publishing Policies
Viser Technology Pte. Ltd. requests all members involved in the journal publishing process to adhere to the "Code of Conduct for Journal Editors" and "Code of Conduct for Journal Publishers" as stipulated by COPE (Committee on Publication Ethics).
The publisher strictly adheres to the guidelines and best practices, which include Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from the International Committee of Medical Journals Editors (ICMJE) and the Principles of Transparency and Best Practice in Scholarly Publishing developed by Committee on Publication Ethics (COPE), Directory of Open Access Journals (DOAJ), Open Access Scholarly Publishers Association (OASPA) and World Association of Medical Editors (WAME).
Publications Ethics and Malpractice Statement
As a prestigious peer-reviewed journal we emphasize on publications ethics for editors, reviewers, authors, and publisher very much. We mainly follow the existing SCOPUS requirements and the Committee on Publication Ethics (COPE) Code of Conduct which are widely recognized in the world.
Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, and the society of TIIS.
Publication and Authorship
An authorship is generally considered to be an individual who has made substantial intellectual contributions to a publication (or an article).
Additional criteria for authorship include the following:
- Substantial contributions to the conception or design of the work or the acquisition, analysis, or interpretation of data for the work
- Drafting the work or revising it critically for important Intellectual content
- Final approval of the version to be published
- Agreement to be accountable for all aspects of the work in ensuring that questions related th the accuracy or integrity of any part of the work are appropriately investigated and resolved
All articles should be original and not published in any other journals before. If an author is using a lengthy text from another source, it should be cited within quotes and the reference should be given properly. Plagiarism or self-plagiarism in any form will never be acceptable.
An article should acknowledge and cite the work of others where appropriate, fully and accurately attributing relevant sources. In general, the article provides a list of references.
The article may acknowledge the funding, support, sponsorship and other forms of input (including that of the university, institute, organization or government) to the work in an appropriate way.
The prospective author must make sure that the submitted article is not under publication consideration or under review in another journal. We will not accept any articles with same exact material from another journal.
If the submitted article is an extended version of the article already presented in a conference, the author should address it in front page of the submitted paper and in addition, the author must submit the preliminary article published in the conference proceedings too. Unless the preliminary article is submitted, We will not accept submission for review. The extended version of the submitted article should add more than 30% substantial contents compared to the preliminary article.
Author's Responsibilities
All authors should agree to make plausible revisions to be suggested by reviewers and the editorial members. If the author refuses to do the revision without acceptable causes, the submitted article will be immediately rejected.
All authors will be required to correct any errors and to withdraw incorrect information in the submitted article.
All authors who have made a significant contribution to the article should be included as co-authors. An inclusion of person(s) who do not contribute in the co-author list is inappropriate. One of co-authors should sign a copyright transfer form before the final publication.
Peer Review/Responsibility for The Reviewers
All of the submitted papers will be peer-reviewed. The name of all reviewers will be blind. All reviewers should be academically qualified to review a submitted article, and they should complete her/his review scores and review comments in time. The review comments will be constructive for authors.
The reviewer should be fair and unprejudiced in reviewing a submitted article.
The reviewer should not have any conflict of interest with the research, author, or the research funding authorities of a submitted article. In case of a conflicting interest, the reviewer should inform the assigned editor of it and the assigned editor will manage the conflict by reassigning required reviewer(s) to the article.
The reviewer should not reveal any information related to the assigned article to other parties.
Editorial Responsibilities
The Editor-in-Chief and editor should preclude business needs from compromising intellectual standards.
- The EIC and editor should ensure the quality of the material they publish.
- The EIC has the authority to make a final decision on the submitted article based on reviewers' and editor's review scores/comments or his/her own discretion.
- The editor can make a preliminary decision on the submitted paper based on reviewers' scores/comments or his/her own discretion. The editor can provide his/her own review comments or suggestions on the submitted paper with EIC.
- The EIC and editor should be fair and should not use prejudice/bias of any kind against the author during the review process.
- The EIC and editor's decisions to accept or reject a paper for publication should be based only on the paper's importance, originality, and clarity, and the study's relevance to the remit of the journal.
- The EIC or any member of the editorial board should not have any conflict of interest regarding the article under consideration.
Anonymity of reviewers as well as the author should be maintained by the EIC and editor during the review process.
When an error is found, the EIC should correct it immediately or withdraw the publication.
Publishing Ethics Issues
Monitoring/safeguarding of the publishing ethics will be maintained by the EIC and the editorial board.
- The EIC with the editorial board should maintain high levels of intellectual and ethical standards, precluding business needs from compromising intellectual standards.
- The EIC should ensure that plagiarism, self-plagiarism, and fraudulent data are not allowed as mentioned above.
- The EIC should be willing to publish corrections, clarifications, withdrawals, and apologies as appropriate when needed.
ISSN: 2661-4413 (online)
ISSN: 2661-4405 (print)
The publication frequency of this journal is Monthly
金光虎 | - | 中国 |
付青松 | - | 中国 |
欧德功 | - | 中国 |
丁建华 | - | 中国 |
柳洪 | - | 中国 |
郭腾 | - | 中国 |
Email: viser-tech@outlook.com
Submit and Check
Registration and login are required to submit items online and to check the status of current submissions. To register, click the register button below. If you already have an account, proceed to login through the following with your username and password.
Latest Issue
Archives
Search
Volume 7, Issue 6, 2025
“荣耀之环”关键建造技术研究
张弛, 李明华, 王圳
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.16988
绿色建筑理念在现代建筑设计中的应用研究
刘玉航
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.16989
建筑框架结构混凝土工程施工技术的研究
郭孝汝
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.16990
建筑工程水泥混凝土工程施工技术及其管理
刘存
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.16991
顶管穿越高速路基变形控制及道路安全措施
王漾
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.16992
市政工程中结构设计存在的问题和解决措施
王真真
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.16993
新理念在道路桥梁工程中造价管理中的应用研究
闵亮
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.16994
公路工程路基压实施工技术措施探讨
郑伟波
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.16995
建筑深基坑支护工程施工技术与应用分析
张守用
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.16996
建筑工程造价预算控制的关键点与措施
柴小勇
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.16997
精细化管理在路桥工程施工中的应用
王腾骏
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.16998
小型农田水利工程管理中的难点与突破策略探究
买买提•阿力木
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.16999
建筑机械设计自动化设备的安全控制研究
朱超尘
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17000
建筑工程管理中信息技术的应用探讨
盖攀超
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17001
地图制图技术在地理信息系统数据中的应用
孙嫣
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17002
公路沥青混凝土路面裂缝成因及防治措施
李发新
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17003
浅析市政钻孔灌注桩施工的工艺重点
杨亮
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17004
地质工程勘察的现状及优化策略探析
王一诚
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17005
建筑施工方案优化对项目质量与进度控制的影响研究
贾亚东
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17006
浅析石油化工建设项目施工成本控制
刘雨龙
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17007
建筑工程造价预算控制关键点与措施研究
张铭
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17008
水利安全生产工作的原则及措施
张媛媛
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17009
无人机LiDAR与高清影像协同在国土调查外业举证中的应用分析
张康, 梁锐, 刘嘉庆
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17010
建筑工程经济在工程造价中的运用探析
楼帅帅
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17011
BIM应用下建筑工程造价精细化管理策略研究
林智翀
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17012
精细化管理在房地产建筑施工管理中的实践刍议
茹艳秋, 王鹏荣
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17013
建筑工程管理中全过程造价管理的应用研究
于永霞
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17014
基于清单计价模式的装配式建筑造价管理措施
楼扬帆
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17015
新时期环境下的建筑造价标准管理应对措施
方程然
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17016
建筑工程深基坑施工技术管理措施研究
赵正良
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17017
建筑工程管理中的控制要点与优化措施
段春松
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17018
钢结构厂房托梁拔柱改造设计及施工研究
王淑颖
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17019
市政道路行车路面井盖设施病害与防控分析
左立波
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17020
建筑工程技术类项目施工进度管理优化与信息化应用研究
刘运飞
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17021
铁路货车轮对轴承无人化压装关键技术研究
杜世国, 王耀, 唐明强, 常春明, 王锋, 田新举
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17022
GPS测量技术在海洋测绘中的运用分析
欧阳飞
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17023
新材料在水利堤坝抗渗加固中的应用及其效益评估
覃晓艳, 黄光源, 周启玉, 彭祖钰, 林雅兰
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17024
某住宅户型改造结构加固设计
梁添
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17025
探索信息管理系统在基层水利工程建设管理中的应用
马文秀
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17026
建筑空间设计对使用者心理影响的实证研究
靳献龙
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17027
工程结算审核常见问题及规范化处理措施探析
唐越
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17028
EPC总承包项目中工程造价控制关键环节分析
贾艳芳
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17029
绿色建筑标准下的雨水收集利用系统设计
崔乐
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17030
建筑电气工程中防雷接地技术的应用分析
管长泽
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17031
装配式建筑结构抗震性能优化策略研究
胡迪
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17032
高层建筑外立面构造与遮阳节能设计研究
李佩璠
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17033
智能化建筑设计的技术发展与应用前景
胡雪峰
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17034
数字技术在建筑工程管理工作中的应用探究
陈桂兰, 黄弋珊
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17035
绿色建筑工程管理中存在的问题与对策研究
陈法林, 林珊如
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17036
工程测量数据可视化技术及其在项目管理中的应用
惠清聪
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17037
智能化发展下工程测量中的数字化测绘技术探析
张光阳
Architecture Engineering and Management
|
Volume 7 Issue 6, 2025
|
PDF
DOI: 10.33142/aem.v7i6.17038
This journal charges an article processing charge of S$ 600.00 (Singapore Dollars)
Viser Technology provides the following payment channels. Upon reception of the invoice from Viser, you may choose one of the following payment methods that suit you the most.
Bank Transfer / Wire Transfer
- Bank: DBS Bank Ltd
- Account Name: Viser Technology Pte Ltd
- Account No.: 023-906417-5
- Swift Code: DBSSSGSG
Alipay / Wechat Pay
Scan the following QR code for payment
UnionPay
Viser supports payments via UnionPay. If you wish to make the payment using a UnionPay enabled credit/debit card, please contact us at viser-tech@outlook.com to request for the payment link to be sent to your email address. Once you have received the payment request email, click on the link to go to the secure UnionPay payment page to complete the payment.
In your payment request email, please indicate the following information:
- Author Name(s)
- Article Number
- Article Title
- Journal Title
Should you encounter any problem related to payment, please contact viser-tech@outlook.com for assistance.