Architecture Engineering and Management

Introduction

Architecture Engineering and Management was found by Viser Technology Pte. Ltd. in Singapore. The journal pay much attention to quality of paper, strictly select manuscripts and follow normal standard of layout. The journal, a high-level academic , is deeply favoured by postsecondary teacher and scientific researchers. As a journal of open access, the journal dedicated to publish high quality academic papers of construction. Meanwhile the journal provide a platform of communication and information exchange for engineering technicians and professionals. All journal’s papers are indexed by authoritative websites such as CNKI and CQVIP etc.

Policies

Open Access Policy

This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.

Creative Commons Attribution-NonCommercial-NoDerivs (CC BY-NC-ND):

Allows users to copy and distribute the Article, provided this is not done for commercial purposes and further does not permit distribution of the Article if it is changed or edited in any way, and provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, and that the licensor is not represented as endorsing the use made of the work. The full details of the license are available at https://creativecommons.org/licenses/by-nc-nd/4.0/.

Copyediting and Proofs

Manuscripts must be written either in good American or British English, in a clear language, correct punctuations, and consistent style throughout the manuscript. Authors are advised to send for professional English language editing service before submission. (Viser Manuscript Submission Template)

Editorial Policies

Peer Review

Viser Technology Pte. Ltd. follows a double-blind peer-review procedure for submissions of all manuscripts to its journals.

All submitted manuscripts are subjected to a fair, unbiased, and extensive peer review in consultation with the assigned journal's Editorial Board Member and independent internal or external referees (usually two reviewers), which have expertise in the field of the submitted manuscripts. The peer-review applies a short and rapid, but fair and professional assessment on all submitted manuscripts. The journal's Editor-in-Chief is then decided on the submitted manuscripts based on all the peer reviewers' comments before conveying to the author(s).

All submissions from the Editor-in-Chief will undergo independent peer-review and assess by the journal's Editorial Board Member or in-house Editor for the decision on acceptance.

Ethical Approval of Studies and Informed Consent

For human or animal experimental investigations, it is a prerequisite to provide a formal review and approval, or review and waiver, by an appropriate institutional review board or ethics committee, which should be documented in the paper. For investigations undertaken on human subjects, the manner in which the informed consent was obtained from the study participants (i.e., oral or written) should be stated clearly in the Materials and Methods section.

The authors must obtain patient consent either orally or written when they use confidential case material. However, patient consent is not required for very brief case vignettes that do not contain identifying information or if the case material is masked sufficiently to prevent the identification of the patient.

The authors should inform and discuss with the recruiting patients on the purpose(s) of publication, the possible risks and benefits to obtain, and the patient's right to withhold or withdraw consent. In the case of a minor patient, consent should be obtained from the parent(s) or guardian(s). The authors should not perform any misconduct or deceive the recruiting patients in obtaining their consent.

Standard Protocol on Approvals, Registrations, Patients Consents & Animal Protection

Human: All clinical investigations must be conducted according to the Declaration of Helsinki principles, as revised in 2000 and 2008. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (www.icmje.org) in conjunction with the patient's consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request the authors to provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study if necessary.

Animals: All original research manuscripts involving the use of animals, the authors should indicate whether relevant international, national, and/or institutional guidelines for the care and use of laboratory animals were conducted accordingly. The authors must include details of animal welfare (such as species, number, gender, age, weight, housing conditions, welfare, training and the fate of the animals at the end of the experiment) and relevant details of steps taken to ameliorate suffering in all works in the Materials and Method section of a manuscript. Similarly, any experiments involving animals from clients or private institutions, the authors are required to get informed client consent and adhere to a high standard (best practice) of veterinary care. These details should be included in the Materials and Methods section of the manuscript.

Publishing Ethics

Publishing Policies

Viser Technology Pte. Ltd. requests all members involved in the journal publishing process to adhere to the "Code of Conduct for Journal Editors" and "Code of Conduct for Journal Publishers" as stipulated by COPE (Committee on Publication Ethics).

The publisher strictly adheres to the guidelines and best practices, which include Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from the International Committee of Medical JournalsEditors (ICMJE) and the Principles of Transparency and Best Practice in Scholarly Publishing developed by Committee on Publication Ethics (COPE), Directory of Open Access Journals (DOAJ), Open Access Scholarly Publishers Association (OASPA) and World Association of Medical Editors (WAME).

ISSN

ISSN: 2661-4413 (online)

ISSN: 2661-4405 (print)

Publishing Frequency

The publication frequency of this journal is Monthly

Editor(s)-in-Chief

杨克明	新乡北方车辆仪表有限公司	中国

Editorial Board Members

付青松	重庆通拓交通规划设计有限公司	中国
欧德功	宁波市民用建筑设计研究院有限公司	中国
丁建华	南京软件园经济发展有限公司	中国
柳洪	浙江集典建设有限公司	中国
郭腾	枣庄市建筑设计研究院	中国

Indexation

Contact

Email: viser-tech@outlook.com

Submit and Check

Registration and login are required to submit items online and to check the status of current submissions. To register, click the register button below. If you already have an account, proceed to login through the following with your username and password.

Latest Issue

Volume 2 Issue 6, 2020

Search

Volume 2, Issue 6, 2020

BIM技术在市政工程造价管理中的应用
潘炳然
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2400

市政工程施工现场管理存在的问题与对策
陈尊鹏, 肖磊
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2401

浅谈一种过滤、安全、调压合为一体的燃气调压器结构
胡丽芬, 刘云飞
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2402

高速公路桥梁施工中高墩施工技术应用
王云良
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2403

建筑工程施工现场安全监督管理
任德明
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2404

节能环保条件下建筑工程材料检测的重要
汤金磊
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2405

建筑工程施工中深基坑支护的施工技术
商传洲
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2406

解决临沂城市交通拥堵问题研究
王伟国, 赵世涛
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2407

建筑工程安全监理中风险管理研究
施建秋
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2408

工业厂房结构设计中钢结构设计应用研究
郑月
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2409

浅析机电安装工程的施工技术及质量控制
强争刚
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2410

公路桥梁护栏安全结构设计分析
刘劲草
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2411

BIM技术在隧道与地下工程中的应用研究
裴志明
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2412

健康产业园区空间布局模式及其后疫情时代发展模式研究
毕雪娇
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2413

岩土工程深基坑支护存在的问题以及控制措施探究
王勋
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2414

基于加强房屋建筑工程项目管理的问题及措施研究
别科峰
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2415

电梯检测时控制系统常见问题及对策
夏钟兴, 姚长鸿
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2416

建筑钢结构焊接变形的控制措施研究
张世伟, 李曦, 张荣冰, 严若林, 龙志磊
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2417

浅析建筑电气的防雷接地方法
杨君
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2418

预制装配式建筑施工技术分析
任建双
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2419

保温节能施工技术在土建建筑外墙施工中的应用
葛利娜
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2420

提高有机粘结剂球团强度的必要性及措施
陈志远, 周晓雷*, 赵志豪, 胡耀先
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2421

校园空调系统运行管理与故障维修的探讨
马鑫
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2422

探讨岩土工程勘查中的地基处理问题
黄法忠
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2423

关于装配式建筑施工技术在建筑工程施工管理中的应用
鲁瀚翔
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2424

框架剪力墙结构建筑施工技术在建筑工程中的应用探析
王立东
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2425

探究节能降耗技术在城建施工中的应用
张珊珊, 刘婷婷, 尚泳延, 司沥通
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2426

探讨城建施工过程中技术管理和控制方法
王玲, 严雨飞, 司银莉, 魏亚君
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2427

微析城建工程基坑开挖施工技术
尚军材, 张晓龙, 张会歌, 郭晓艳
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2428

城建工程结构施工中预应力混凝土技术分析
任路婷, 尹超南, 樊江宾, 冯伟纳
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2429

刍议城建工程中静压预应力管桩施工技术
李晓晓, 罗慧, 赵丽丽, 蒋萌萌
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2430

探析后张法预应力技术在城建工程施工中的应用
贾烨, 刘佳喆, 马华帅, 张兰兰
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2431

探讨城建土木工程施工技术要点
陈亚冲, 段艮亮, 李春阳, 宋明明
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2432

城建工程屋面防水施工技术研究
安宁, 徐亚周, 朱行空, 赵瑞
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2433

浅析信息化背景下的现代建筑工程管理优化措施
郑宇
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2434

工程造价审计对项目管理的影响研究
董宏艳
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2435

电气工程及其自动化的智能化技术应用分析
赵衍徽, 许岩
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2436

建筑机电安装工程的施工技术及其质量控制
王志雄, 郝腾飞
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2437

化工生产技术管理与化工安全生产的关系
杜明明, 任俊刚, 陈龙
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2438

关于钢结构防腐防火涂料工程施工技术及其应用研究
刘明霆
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2439

化学药剂在矿物加工中的应用
延新刚
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2440

设置PLC的柔性IO地址的探索与实践
王赛
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2441

装配式建筑套筒灌浆技术施工控制探析
毕高飞
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2442

探讨营林管理工作技术措施
闵月红
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2443

建筑工程土建施工现场管理的优化策略
李立伟
Architecture Engineering and Management | Volume 2 Issue 6, 2020 | PDF
DOI: 10.33142/aem.v2i6.2444

Article Processing Charges

This journal charges an article processing charge of S$ 300.00 (Singapore Dollars)

Payment Instructions

Viser Technology provides the following payment channels. Upon reception of the invoice from Viser, you may choose one of the following payment methods that suit you the most.

Bank Transfer / Wire Transfer

Bank: DBS Bank Ltd
Account Name: Viser Technology Pte Ltd
Account No.: 023-906417-5
Swift Code: DBSSSGSG

Alipay / Wechat Pay

Scan the following QR code for payment

UnionPay

Viser supports payments via UnionPay. If you wish to make the payment using a UnionPay enabled credit/debit card, please contact us at viser-tech@outlook.com to request for the payment link to be sent to your email address. Once you have received the payment request email, click on the link to go to the secure UnionPay payment page to complete the payment.

In your payment request email, please indicate the following information:

Author Name(s)
Article Number
Article Title
Journal Title

Should you encounter any problem related to payment, please contact viser-tech@outlook.com for assistance.