
Engineering Construction Technology
The Engineering Construction Technology, namely "journal of Engineering Construction Technology by Singapore Viser Technology Ptd Ltd, international standard serial number: ISSN2972-4058. For a long time, the magazine has paid attention to quality, standardized layout, strict selection, high academic level, favored by construction units, university teachers and research institutes researchers. The Journal is an open access journal dedicated to publishing high quality academic papers in the field of architecture. At the same time for the construction engineering technicians and professionals to provide a platform for communication and information exchange, the article has been authoritative website full text collection.
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge, published as open access. Authors retain copyright but licence exclusive rights in their article to the publisher, authors have the right to:
- Share their article in the same ways permitted to third parties under the relevant user licence (together with personal (scholarly) purposes to create certain derivative works), as long as they give proper attribution and credit to the published work.
- Retain patent, trademark and other intellectual property rights (including raw research data).
- Proper attribution and credit for the published work
Creative Commons Attribution-NonCommercial(CC BY-NC-ND):
Allows users to copy and distribute the Article, provided this is not done for commercial purposes and further does not permit distribution of the Article if it is changed or edited in any way, and provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, and that the licensor is not represented as endorsing the use made of the work. The full details of the license are available at https://creativecommons.org/licenses/by-nc-nd/4.0/.
Editorial Policies
Peer Review
Viser Technology Pte. Ltd. follows a double-blind peer-review procedure for submissions of all manuscripts to its journals.
All submitted manuscripts are subjected to a fair, unbiased, and extensive peer review in consultation with the assigned journal's Editorial Board Member and independent internal or external referees (usually two reviewers), which have expertise in the field of the submitted manuscripts. The peer-review applies a short and rapid, but fair and professional assessment on all submitted manuscripts. The journal's Editor-in-Chief is then decided on the submitted manuscripts based on all the peer reviewers' comments before conveying to the author(s).
All submissions from the Editor-in-Chief will undergo independent peer-review and assess by the journal's Editorial Board Member or in-house Editor for the decision on acceptance.
Ethical Approval of Studies and Informed Consent
For human or animal experimental investigations, it is a prerequisite to provide a formal review and approval, or review and waiver, by an appropriate institutional review board or ethics committee, which should be documented in the paper. For investigations undertaken on human subjects, the manner in which the informed consent was obtained from the study participants (i.e., oral or written) should be stated clearly in the Materials and Methods section.
The authors must obtain patient consent either orally or written when they use confidential case material. However, patient consent is not required for very brief case vignettes that do not contain identifying information or if the case material is masked sufficiently to prevent the identification of the patient.
The authors should inform and discuss with the recruiting patients on the purpose(s) of publication, the possible risks and benefits to obtain, and the patient's right to withhold or withdraw consent. In the case of a minor patient, consent should be obtained from the parent(s) or guardian(s). The authors should not perform any misconduct or deceive the recruiting patients in obtaining their consent.
Standard Protocol on Approvals, Registrations, Patients Consents & Animal Protection
Human: All clinical investigations must be conducted according to the Declaration of Helsinki principles, as revised in 2000 and 2008. Authors must comply with the guidelines of the International Committee of Medical Journal Editors (www.icmje.org) in conjunction with the patient's consent for research or participation in a study. Patients' names, initials, or hospital numbers must not be mentioned anywhere in the manuscript (including figures). Editors may request the authors to provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study if necessary.
Animals: All original research manuscripts involving the use of animals, the authors should indicate whether relevant international, national, and/or institutional guidelines for the care and use of laboratory animals were conducted accordingly. The authors must include details of animal welfare (such as species, number, gender, age, weight, housing conditions, welfare, training and the fate of the animals at the end of the experiment) and relevant details of steps taken to ameliorate suffering in all works in the Materials and Method section of a manuscript. Similarly, any experiments involving animals from clients or private institutions, the authors are required to get informed client consent and adhere to a high standard (best practice) of veterinary care. These details should be included in the Materials and Methods section of the manuscript.
Publishing Ethics
Publishing Policies
Viser Technology Pte. Ltd. requests all members involved in the journal publishing process to adhere to the "Code of Conduct for Journal Editors" and "Code of Conduct for Journal Publishers" as stipulated by COPE (Committee on Publication Ethics).
The publisher strictly adheres to the guidelines and best practices, which include Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals from the International Committee of Medical Journals Editors (ICMJE) and the Principles of Transparency and Best Practice in Scholarly Publishing developed by Committee on Publication Ethics (COPE), Directory of Open Access Journals (DOAJ), Open Access Scholarly Publishers Association (OASPA) and World Association of Medical Editors (WAME).
Publications Ethics and Malpractice Statement
As a prestigious peer-reviewed journal we emphasize on publications ethics for editors, reviewers, authors, and publisher very much. We mainly follow the existing SCOPUS requirements and the Committee on Publication Ethics (COPE) Code of Conduct which are widely recognized in the world.
Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the author, the journal editor, the peer reviewer, and the society of TIIS.
Publication and Authorship
An authorship is generally considered to be an individual who has made substantial intellectual contributions to a publication (or an article).
Additional criteria for authorship include the following:
- Substantial contributions to the conception or design of the work or the acquisition, analysis, or interpretation of data for the work
- Drafting the work or revising it critically for important Intellectual content
- Final approval of the version to be published
- Agreement to be accountable for all aspects of the work in ensuring that questions related th the accuracy or integrity of any part of the work are appropriately investigated and resolved
All articles should be original and not published in any other journals before. If an author is using a lengthy text from another source, it should be cited within quotes and the reference should be given properly. Plagiarism or self-plagiarism in any form will never be acceptable.
An article should acknowledge and cite the work of others where appropriate, fully and accurately attributing relevant sources. In general, the article provides a list of references.
The article may acknowledge the funding, support, sponsorship and other forms of input (including that of the university, institute, organization or government) to the work in an appropriate way.
The prospective author must make sure that the submitted article is not under publication consideration or under review in another journal. We will not accept any articles with same exact material from another journal.
If the submitted article is an extended version of the article already presented in a conference, the author should address it in front page of the submitted paper and in addition, the author must submit the preliminary article published in the conference proceedings too. Unless the preliminary article is submitted, We will not accept submission for review. The extended version of the submitted article should add more than 30% substantial contents compared to the preliminary article.
Author's Responsibilities
All authors should agree to make plausible revisions to be suggested by reviewers and the editorial members. If the author refuses to do the revision without acceptable causes, the submitted article will be immediately rejected.
All authors will be required to correct any errors and to withdraw incorrect information in the submitted article.
All authors who have made a significant contribution to the article should be included as co-authors. An inclusion of person(s) who do not contribute in the co-author list is inappropriate. One of co-authors should sign a copyright transfer form before the final publication.
Peer Review/Responsibility for The Reviewers
All of the submitted papers will be peer-reviewed. The name of all reviewers will be blind. All reviewers should be academically qualified to review a submitted article, and they should complete her/his review scores and review comments in time. The review comments will be constructive for authors.
The reviewer should be fair and unprejudiced in reviewing a submitted article.
The reviewer should not have any conflict of interest with the research, author, or the research funding authorities of a submitted article. In case of a conflicting interest, the reviewer should inform the assigned editor of it and the assigned editor will manage the conflict by reassigning required reviewer(s) to the article.
The reviewer should not reveal any information related to the assigned article to other parties.
Editorial Responsibilities
The Editor-in-Chief and editor should preclude business needs from compromising intellectual standards.
- The EIC and editor should ensure the quality of the material they publish.
- The EIC has the authority to make a final decision on the submitted article based on reviewers' and editor's review scores/comments or his/her own discretion.
- The editor can make a preliminary decision on the submitted paper based on reviewers' scores/comments or his/her own discretion. The editor can provide his/her own review comments or suggestions on the submitted paper with EIC.
- The EIC and editor should be fair and should not use prejudice/bias of any kind against the author during the review process.
- The EIC and editor's decisions to accept or reject a paper for publication should be based only on the paper's importance, originality, and clarity, and the study's relevance to the remit of the journal.
- The EIC or any member of the editorial board should not have any conflict of interest regarding the article under consideration.
Anonymity of reviewers as well as the author should be maintained by the EIC and editor during the review process.
When an error is found, the EIC should correct it immediately or withdraw the publication.
Publishing Ethics Issues
Monitoring/safeguarding of the publishing ethics will be maintained by the EIC and the editorial board.
- The EIC with the editorial board should maintain high levels of intellectual and ethical standards, precluding business needs from compromising intellectual standards.
- The EIC should ensure that plagiarism, self-plagiarism, and fraudulent data are not allowed as mentioned above.
- The EIC should be willing to publish corrections, clarifications, withdrawals, and apologies as appropriate when needed.
"Engineering Construction Technology" adhering to the scientific spirit, in order to promote academic exchanges, scientific and technological progress, improve the level of engineering construction for the purpose of promoting architectural design, building materials, building technology, urban planning, municipal landscape and other fields of scientific research, design, construction of the latest research results and engineering practice summary service. The main columns of the journal are: construction engineering, municipal engineering, metallurgical engineering, chemical engineering, material engineering, petroleum engineering, engineering management and construction technology, energy conservation and environmental protection, mechanical and electrical machinery, energy and mining exploration and mapping
ISSN: 2972-4058 (online)
ISSN: 2972-404X (print)
The publication frequency of this journal is Monthly
朱强 | 广东电网有限公司广州供电局 | 中国 |
魏忠 | 南京工业大学浦江学院 | 中国 |
高江 | 中国建筑技术集团有限公司 | 中国 |
倪勤盛 | 珠海许继电气有限公司 | 中国 |
陈鹏 | 广东中电绿能科技有限公司 | 中国 |
王子红 | 中国电子系统工程第四建设有限公司 | 中国 |
张耕野 | 徐州市水利工程运行管理中心 | 中国 |
侯明卫 | 安阳优创实业有限责任公司 | 中国 |
刘刚 | 江苏河海建设有限公司 | 中国 |
赵欢 | 新疆北新路桥集团股份有限公司 | 中国 |
王海军 | 新疆北新岩土工程勘察设计有限公司 | 中国 |
王永华 | 国网新疆经研院 | 中国 |
洪秋生 | 中国水产广州建港工程有限公司 | 中国 |
刘汉涛 | 中庆建设有限责任公司 | 中国 |
钱冰 | 淄博市特种设备检验研究院 | 中国 |
吉咸伟 | 上海元易勘测设计有限公司 | 中国 |
杨熠卿 | 中钢集团马鞍山矿山研究总院股份有限公司 | 中国 |
宋世超 | 宁博恒奕工程管理有限公司 | 中国 |
张聪 | 纳思同(江苏)高科技发展有限公司 | 中国 |
Email: viser-tech@outlook.com
Submit and Check
Registration and login are required to submit items online and to check the status of current submissions. To register, click the register button below. If you already have an account, proceed to login through the following with your username and password.
Latest Issue
Archives
Search
Volume 3, Issue 8, 2025
小实验用小型辊压机整体结构设计与装配研究
宋维轩
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17493
露天矿边坡爆破对岩体稳定性的影响及控制措施研究
徐伟
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17494
传统建筑装饰艺术中琉璃脊饰的文化内涵研究
宋冰珂, 刘文慧
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17495
数字化技术在冲压模设计与制造中的应用
陈杏妹
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17496
地质矿产勘查新方法与新技术的探索与实践
李鑫元
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17497
矿山安全监控系统及预警技术应用研究
张智烽, 林永明
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17498
论环境工程中城市污水处理技术应用分析
王楠楠
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17499
多级形变热处理对Cu-Fe-P合金微观组织与性能的影响
罗文远, 段庆阳, 王少华, 冯泽强, 景洁, 吴慧云, 黄家亮
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17500
机电工程技术应用及其自动化问题探析
郭文龙
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17501
机电工程中智能化技术的应用探究
牛昭坡
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17502
机械设计制造及其自动化的发展与挑战
张建轩
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17503
小型辊压机机架结构设计与稳定性分析
秦攀
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17504
机械设计中的加工问题及改善措施浅析
李蓬勃
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17505
公路路基高边坡锚杆(索)支护施工技术应用
刘伟
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17506
华龙一号新燃料升降机轨道辅助安装设备设计研究
张小龙, 田春强, 乾龙, 吕川, 郭士芳
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17507
液化天然气(LNG)储运的安全技术及管理措施
赵小军
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17508
液化天然气安全管理中存在的问题及对策
张智卿
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17509
液化天然气装置净化与液化工艺关键技术研究
郭建廷
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17510
几内亚博凯大区红土型铝土矿成矿理论与找矿方法研究
李桂敏
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17511
大数据技术在测绘地理信息服务中的应用研究
王学谦
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17512
基于智能化控制的硝酸生产安全管理与效率提升探索
杜冬琛
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17513
绿色工艺视角下硝酸生产过程能耗优化与减排路径研究
段颖
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17514
建筑智能化工程中节能幕墙施工技术研究
王宣
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17515
基于分布式光伏的住宅建筑屋顶施工技术研究
唐龙飞, 唐陆平
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17516
土建工程管理及施工质量控制研究
李剑男
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17517
BIM技术在建筑工程项目管理中的应用
曹珍榕
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17518
锂电池极片辊压成形过程中的压实密度影响因素和分析
薛冰军, 刘振州
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17519
建筑工程的精细化施工管理方法探讨
汤川鄂
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17520
信息化技术在建筑工程监理中的应用研究
郑坚和
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17521
建筑工程监理的现场管理及质量控制探讨
郑坚和
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17522
关于花侯路浏阳河桥0#块施工技术控制
何华平
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17523
GIS和测绘技术在基本农田保护规划中的应用
王彤
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17524
隔震控制技术在建筑结构设计中的应用
苏永东
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17525
数字化测绘技术在国土空间规划中的应用分析
杨柳, 唐丽
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17526
BIM技术在超高层建筑多专业协同设计中的集成应用研究
梁冰, 赵雪宁, 马彦奇, 左超飞, 苗成松
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17527
商业综合体给排水系统负荷计算与设备选型研究
王森
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17528
地热资源勘查中水文地质调查的运用分析
聂龙龙
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17529
水封油库设计的水文地质及工程地质问题
常广勋, 王婵君, 熊娟
Engineering Construction Technology
|
Volume 3 Issue 8, 2025
|
PDF
DOI: 10.33142/ect.v3i8.17530
This journal charges an article processing charge of S$ 0.00 (Singapore Dollars)
Viser Technology provides the following payment channels. Upon reception of the invoice from Viser, you may choose one of the following payment methods that suit you the most.
Bank Transfer / Wire Transfer
- Bank: DBS Bank Ltd
- Account Name: Viser Technology Pte Ltd
- Account No.: 023-906417-5
- Swift Code: DBSSSGSG
Alipay / Wechat Pay
Scan the following QR code for payment
UnionPay
Viser supports payments via UnionPay. If you wish to make the payment using a UnionPay enabled credit/debit card, please contact us at viser-tech@outlook.com to request for the payment link to be sent to your email address. Once you have received the payment request email, click on the link to go to the secure UnionPay payment page to complete the payment.
In your payment request email, please indicate the following information:
- Author Name(s)
- Article Number
- Article Title
- Journal Title
Should you encounter any problem related to payment, please contact viser-tech@outlook.com for assistance.